Skip to main content
Contract production and export for HoReCa projects
How to choose restaurant and café chairs
Guide

How to choose restaurant and café chairs

By Livinya Project Team · Updated · 2 min read

Short answer

Choose restaurant and café chairs for a sturdy commercial frame, a surface that wipes clean and resists wear, and a seat height that matches the table. For a 75 cm table the seat height is usually 45–47 cm. For upholstered models in commercial use, fabric rated at least 30,000 Martindale is recommended.

Frame: metal, wood or aluminium

A metal frame is strong in a slim profile and stands up to frequent cleaning, which makes it the most common choice for busy cafés. A wooden frame looks warmer and suits restaurant dining rooms. Aluminium is light and does not rust, so it suits terraces and outdoor areas.

In Europe, strength and safety requirements for non-domestic seating are set out in EN 16139. On large projects it is good practice to ask the manufacturer for test information.

Fabric and surface

  • Martindale abrasion: 15,000–30,000 for domestic use, 30,000 and above for heavy use such as hotels and restaurants.
  • In cafés, faux leather or wipeable fabric shortens cleaning time.
  • Fire safety: EN 1021-1/-2 in Europe; BS 5852 (Crib 5) for UK contract venues. Ask for fire-retardant fabric in the quotation.
  • Your own fabric (COM) can be used; the required metres are confirmed with the manufacturer.

Sizes: table, chair and bar

A gap of about 27–30 cm between seat and table top gives a comfortable sit. With armchairs, check that the arms slide under the table; if they do not, chairs cannot be pushed in and the room looks crowded.

SurfaceSurface heightMatching seat height
Dining table74–76 cm45–47 cm
Counter90–92 cm63–66 cm
Bar105–110 cm75–80 cm

Layout and stacking

Allow about 60 cm of table width per guest. Leave 90 cm behind chairs for service and 120 cm for main aisles. Stackable models save storage space for events and cleaning after closing.

Selection checklist

  • Frame and joints built for commercial use
  • Fabric Martindale rating and fire classification
  • Seat height that matches the table height
  • Floor glides that suit the floor (parquet, stone, epoxy)
  • The same model available for reorders later

Frequently asked questions

Which material is most durable for café chairs?

For heavy use, a metal frame with a wipeable surface needs the least maintenance. Aluminium suits terraces; wood or metal suits indoor rooms.

How many Martindale should restaurant chair fabric have?

At least 30,000 Martindale for commercial use; 40,000–50,000 or more for very busy venues.

How do you choose bar stool height?

Subtract about 27–30 cm from the counter height: a 63–66 cm seat for a 90 cm counter, 75–80 cm for a 105–110 cm bar.

Related categories

Get a quotation for your project

Send the models, quantities and destination country; sales replies in writing with price, lead time and shipping. Orders start from 1 unit.

Request a quote

Products for this guide